Engineering paper (printable)
This engineering paper is ruled in 1/5 inch squares with a heavier line every inch, so 5 squares are 1 inch and decimals count straight off the grid. A header holds Name, Date, Project and Sheet number.
12.7 mm = 1/2 in. Printers leave an edge unprinted: keep the margin wider than yours
1/5 in engineering grid · Letter.
- Square
- 1/5 in (5.08 mm)
- Grid size
- 7.40 × 8.40 in
- Paper
- 215.9 × 279.4 mm
How it is calculated
- Printable area: 190.5 × 216 mm inside 12.7 mm margins, above the check bars.
- Squares: 190.5 ÷ 5.08 = 37 across, 216 ÷ 5.08 = 42 down, whole squares only.
- Print at 100% (Actual size), then measure the 100 mm bar.
Measure the bar at the foot of the printout
True to size: the printer kept 100% within half a millimeter.
Working on engineering paper
Pick a scale where one square is a round number: 1 square = 1 inch puts 5 inches in each bold square; 1 square = 1 foot fits a 37 × 42 ft plan on the Letter sheet.
Write calculations one step per line, one digit per square, so columns of numbers line up.
Number the sheets in the Sheet box so a set of pages stays in order.
Squares on each paper size
Engineering paper (printable) at 1/5 in holds 37 × 42 on Letter, 36 × 45 on A4, 37 × 57 on Legal, 50 × 72 on 11×17: whole squares across × down inside the margins, above the check bars and below the header.
| Grid | Letter | A4 | Legal | 11×17 |
|---|---|---|---|---|
| 1/5 in | 37 × 42 | 36 × 45 | 37 × 57 | 50 × 72 |
| 1/4 in | 30 × 34 | 29 × 36 | 30 × 46 | 40 × 58 |
| 1/10 in | 75 × 85 | 72 × 91 | 75 × 115 | 100 × 145 |
What is engineering paper?
Engineering paper is graph paper ruled 5 squares to the inch with a bold line every inch, and fields at the top for name, date and sheet number. The fifths make decimal lengths easy to plot: 0.2 inch is one square.
Can I use engineering paper for drafting?
This engineering paper is ruled for calculations and sketches. For a drawing where the grid should fade into the background, set Light lines before you print.
How many squares per inch are on engineering paper?
Engineering paper has 5 squares per inch, each 1/5 inch (5.08 mm), with a bold line every 5 squares.
Ready-made PDFs: Letter, A4. Free to print, copy and share under CC0. Sizes of the paper are the published figures of the documents below.