Floor plan graph paper (1/4 inch = 1 foot)
At 1/4 inch = 1 foot each 1/4 inch square is 1 foot of the room, so a room 12 by 15 feet is 12 by 15 squares and its floor area is the count of squares, 180 square feet. On Letter this sheet holds a plan up to 30 × 34 feet.
12.7 mm = 1/2 in. Printers leave an edge unprinted: keep the margin wider than yours
1/4 in floor plan grid, 1/4 in = 1 ft · Letter.
- Square
- 1/4 in (6.35 mm)
- Grid size
- 7.50 × 8.50 in
- Paper
- 215.9 × 279.4 mm
How it is calculated
- Printable area: 190.5 × 216 mm inside 12.7 mm margins, above the check bars.
- Squares: 190.5 ÷ 6.35 = 30 across, 216 ÷ 6.35 = 34 down, whole squares only.
- Print at 100% (Actual size), then measure the 100 mm bar.
Measure the bar at the foot of the printout
True to size: the printer kept 100% within half a millimeter.
Draw a room from your measurements
Measure each wall with a tape, at the floor, and round to the nearest inch. Sketch the room first and write the lengths on the sketch.
On the sheet, one square is 1 foot and each square splits into quarters of 3 inches: a wall of 11 ft 9 in is 11 squares and three quarters.
Draw doors as gaps with their swing, windows as double lines, and measure furniture before you place it: a 3 by 6 ft sofa is 3 by 6 squares.
Area from the grid
Count whole squares for square feet. An L-shaped room splits into rectangles: 12 × 15 ft plus 6 × 8 ft is 180 + 48 = 228 square feet.
How big a room fits on a sheet on each paper size
Floor plan graph paper (1/4 inch = 1 foot) at 1/4 in = 1 ft holds 30 × 34 ft on Letter, 40 × 58 ft on 11×17: whole squares across × down inside the margins, above the check bars and below the header.
| Scale | Letter | 11×17 |
|---|---|---|
| 1/4 in = 1 ft | 30 × 34 ft | 40 × 58 ft |
| 1/8 in = 1 ft | 60 × 68 ft | 80 × 116 ft |
How do you find the square feet of a room on graph paper?
To find the square feet of a room on graph paper at 1/4 inch = 1 foot, count the squares inside the walls (each is 1 square foot), or multiply the squares along each side: 12 × 15 squares is 180 square feet.
What scale is this floor plan paper?
This floor plan paper is drawn at 1/4 inch on paper = 1 foot in the room (1:48). Each square is 1 foot and the bold lines every 4 squares are 4 feet.
How big a room fits on one sheet?
One Letter sheet of floor plan paper fits a room up to 30 × 34 feet below the header; on 11×17 (Tabloid), up to 40 × 58 feet. The table above lists both.
How do you measure a room for a floor plan?
To measure a room for a floor plan, run a tape along each wall at the floor, read to the nearest inch, and write every length on a rough sketch before you draw the plan.
Ready-made PDFs: Letter, 11×17. Free to print, copy and share under CC0. Sizes of the paper are the published figures of the documents below.