How to read a tape measure

To read a tape measure, find the last whole inch number before the end of what you measure, then count the small marks after it. On a tape divided into 1/16 inch, each mark is 1/16 inch, so 5 marks past 7 is 7 5/16 inches, said “7 and 5/16 inches” (185.738 mm). Between two inch numbers the longest mark is the 1/2, the next longest are the 1/4s, then the 1/8s, and the shortest are the 1/16s.

011/161/83/161/45/163/87/161/29/165/811/163/413/167/815/16
One inch in sixteenths. Longer marks are bigger fractions: the 1/2 mark, then 1/4s, 1/8s and 1/16s.

Read any mark on a tape measure

Tap a mark on the blade, or move with the arrow keys, to see how it reads. Or switch to Guess the mark and test yourself.

Mode
78

7 5/16 in
Decimal
7.3125 in
Millimeters
185.74 mm
Said
7 and 5/16 inches
Mark
5 sixteenths past 7, a 1/16 inch mark

Read a measurement step by step

A tape measure reading is the whole inch plus the number of 1/16 inch marks past it, reduced: 7 inches and 5 sixteenth marks is 7 5/16 inches, or 7.3125 in as a decimal.

  1. Hook the end of the tape on the edge of the board, or press the hook against the surface you measure from, and pull the blade straight and flat to the other end.
  2. Find the last whole inch number the end of the object passes. That is the whole part of the measurement, say 7.
  3. Count the marks from that inch to the end of the object. Five sixteenth marks is 5/16, so the length is 7 5/16 inches.
  4. Reduce an even count: 4/16 is 1/4, 8/16 is 1/2, 12/16 is 3/4. That is why the 4th, 8th and 12th marks are longer: they are the quarter and half inch marks, and you can read them straight away.
  5. Feet on a long tape: take 12 inches off for each foot, so 31 inches is 2 feet 7 inches (31 − 2 × 12 = 7). Many tapes print a foot reading along the blade, so you need not count.

Inside and outside measurements and the sliding hook

The hook at the end of a tape measure is loose on its rivets on purpose: it slides by its own thickness, so inside and outside measurements both start at true zero. Pulled against an edge (an outside measurement) the hook slides out; pushed against a wall (an inside measurement) it slides in. Stanley, Lufkin and Klein describe this true-zero hook in their tape documents; U.S. Tape gives its hooks as 1/16 inch (1.588 mm) thick.

Do not tighten or bend a tape measure hook to stop the play: a bent hook adds its error to every measurement.

How to read the metric side of a tape measure

A metric or two-scale tape is numbered in centimeters, with 10 millimeter marks in each. 1 inch is exactly 25.4 mm, so 7 5/16 inches is 185.738 mm.

To change a reading from mm to the nearest sixteenth of an inch, divide by 25.4 and round: 100 mm is 3.937 in, nearest 1/16 is 3 15/16.

Tape measure fractions in order

Between two inch numbers a 1/16 inch tape measure has 15 marks: one 1/2 inch mark, two 1/4 inch marks, four 1/8 inch marks and eight 1/16 inch marks (1 + 2 + 4 + 8 = 15).

Every mark after a whole inch on a tape divided into sixteenths: the fraction it reads, its length class, and the value as a decimal inch and in millimeters (1 in = 25.4 mm exactly, rounded half up)
MarkReadsMark lengthDecimal, inmm
11/16 in1/16 inch0.06251.588
21/8 in1/8 inch0.12503.175
33/16 in1/16 inch0.18754.763
41/4 in1/4 inch0.25006.350
55/16 in1/16 inch0.31257.938
63/8 in1/8 inch0.37509.525
77/16 in1/16 inch0.437511.113
81/2 in1/2 inch0.500012.700
99/16 in1/16 inch0.562514.288
105/8 in1/8 inch0.625015.875
1111/16 in1/16 inch0.687517.463
123/4 in1/4 inch0.750019.050
1313/16 in1/16 inch0.812520.638
147/8 in1/8 inch0.875022.225
1515/16 in1/16 inch0.937523.813

For every 1/64 inch see the fraction to decimal chart.

Special marks on a tape measure

Many US tape measures add framing marks to the inch scale: a highlighted number every 16 inches for stud centers (6 spaces in 8 feet, 96 ÷ 16 = 6) and a mark every 19.2 inches for joists and trusses (5 spaces in 8 feet, 96 ÷ 5 = 19.2). The table lists what tape makers' own documents say about each mark.

Special marks and features of US tape measures as described in tape makers' documents; not every tape has every mark
Mark or featureWhat the documents sayDocuments
16 inStud marks: the blade highlights every 16 inches (16, 32, 48 ...) for stud center layoutApex Tool Group, Klein Tools, Stanley
19.2 inTruss (joist) marks every 19.2 inches; five spaces per 96 inchesApex Tool Group, Klein Tools, Stanley
19.1875 inBlack diamond symbols every 19 3/16 inches (U.S. Tape's wording; 19 3/16 = 19.1875, which other makers print as 19.2)U.S. Tape Company
12 inOn some blades the first 12 inches are graduated to 1/32 inch; the rest of the blade to 1/16 inchApex Tool Group, The L.S. Starrett Company
0.0625 inStandard graduation of a fractional US tape: 1/16 inchApex Tool Group, Klein Tools
12 inFoot readings: blade shows feet as well as inches (each foot from the 1-foot mark)Apex Tool Group, The L.S. Starrett Company
HookTrue-zero (self-compensating) end hook: the hook slides on its rivets by its own thickness, so inside and outside readings both start at zeroStanley, Apex Tool Group, Klein Tools

Tape makers' documents do not set one color for these marks: look at your own blade for the boxed or colored numbers and the small diamonds.

How do you read fractions on a tape measure?

To read fractions on a tape measure, count the marks after the last inch number, put the count over 16 and reduce: 6 marks is 6/16 = 3/8 inch (0.375 in). On the first 12 inches of some tapes the marks are 1/32 inch, so count over 32 there: 6 marks is 6/32 = 3/16 inch.

What do the markings on a tape measure mean?

On a US tape measure the numbered marks are whole inches, and each inch is split into 16 parts by marks of four lengths: the longest is 1/2 inch, then 1/4, 1/8 and the shortest 1/16. Many tapes also highlight every 16 inches for stud spacing and mark every 19.2 inches for joists and trusses, the spacings tape makers such as Lufkin, Klein and Stanley print on the blade.

How do you read a tape measure in inches?

A tape measure reads in inches as the whole inch plus the sixteenth marks past it: 2 inches and 11 sixteenth marks is 2 11/16 inches, or 2.6875 in as a decimal (11 ÷ 16 = 0.6875).

How do you use a tape measure?

To use a tape measure, hook the end on the edge, or butt it against the surface, keep the blade straight and flat, and read at the far end. Let the hook slide: it moves by its own thickness, so inside and outside readings both start at zero.

What is 1/16 inch as a decimal?

1/16 inch is 0.0625 in, or 1.588 mm, the smallest standard mark of a fractional US tape measure. Some blades mark 1/32 inch (0.03125 in, 0.794 mm) on the first 12 inches. The fraction to decimal chart lists every 1/64 to 1 inch.