How to read a ruler: ruler measurements in inches and cm

On an inch ruler the numbers are whole inches, and the marks between them get shorter as the parts get smaller: the 1/2 inch mark is longest, then 1/4, 1/8 and 1/16. On a metric ruler the numbers are centimeters and each small mark is 1 millimeter, so 4 cm and 7 marks is 47 mm. Need a ruler now? Print one at actual size or use the online ruler.

011/161/83/161/45/163/87/161/29/165/811/163/413/167/815/16
One inch in sixteenths: the 1/2 mark is longest, then 1/4, 1/8 and 1/16.
012345
Five centimeters: each number is a centimeter, each small mark a millimeter, the longer middle mark 5 mm.

Read any mark

Tap a mark, or use the arrow keys, to read it; switch to centimeters for the metric edge, or to Guess the mark to practice.

Mode
Scale
78

7 5/16 in
Decimal
7.3125 in
Millimeters
185.74 mm
Said
7 and 5/16 inches
Mark
5 sixteenths past 7, a 1/16 inch mark

How to read an inch ruler

Line the 0 of the ruler up with one end of the object. Most rulers leave a short blank before 0: start at the mark, not at the wooden or plastic end.

Read the last inch number the other end passes, then the mark it stops at. The length of the mark tells its size: the halfway mark is 1/2, the marks halfway again are 1/4 and 3/4, then eighths, then sixteenths.

If the end falls between two marks, take the nearer one. On a 1/16 inch ruler the reading is then within 1/32 inch (0.03125 in, 0.794 mm).

How to read a centimeter and millimeter ruler

Each numbered mark is a centimeter; the 10 small marks in between are millimeters; on the drawing above and on the rulers you print here the 5th is longer, at half a centimeter. 4 cm and 7 mm is 4.7 cm or 47 mm.

A 12 inch ruler with a metric edge runs to about 30 cm: 12 inches is 304.8 mm, or 30.48 cm.

To change millimeters to inches, divide by 25.4: 47 mm is 1.85 in, nearest 1/16 is 1 7/8.

Ruler measurements chart

Every 1/16 inch mark of a ruler: the fraction, in sixteenths, as a decimal inch and in millimeters (1 in = 25.4 mm exactly, rounded half up)
MarkSixteenthsDecimal, inmm
1/16 in1/160.06251.588
1/8 in2/160.12503.175
3/16 in3/160.18754.763
1/4 in4/160.25006.350
5/16 in5/160.31257.938
3/8 in6/160.37509.525
7/16 in7/160.437511.113
1/2 in8/160.500012.700
9/16 in9/160.562514.288
5/8 in10/160.625015.875
11/16 in11/160.687517.463
3/4 in12/160.750019.050
13/16 in13/160.812520.638
7/8 in14/160.875022.225
15/16 in15/160.937523.813
1 in16/161.000025.400

How do you read a ruler in centimeters?

To read a ruler in centimeters, read the last centimeter number, then count the millimeter marks after it: 4 and 7 marks is 4.7 cm (47 mm).

How do you read a millimeter ruler?

On a millimeter ruler every mark is 1 mm; the longer marks are 5 mm and the numbered ones 10 mm (1 cm). Count from 0, or read the last number in centimeters and add the millimeters.

How many cm are in a 12 inch ruler?

12 inches is 30.48 cm, because an inch is exactly 2.54 cm. A ruler with a metric edge may be printed to 30 cm or a little past it.

Is 5/8 bigger than 1/2?

Yes, 5/8 inch is bigger than 1/2 inch. In sixteenths 5/8 is 10/16 and 1/2 is 8/16, so 5/8 is 2/16 (1/8) inch longer: 0.625 in against 0.5 in.

What is 1/8 inch as a decimal?

1/8 inch is 0.125 in, or 3.175 mm.