Fraction to decimal chart (inch fractions to decimal and mm)
1/8 inch is 0.1250 in (3.175 mm), 1/4 is 0.2500, 1/2 is 0.5000 and 3/4 is 0.7500. The chart lists all 64 sixty-fourths of an inch with the decimal to four places and millimeters to three, rounded from 1 in = 25.4 mm exactly, so 1/16 in is 1.588 mm, not 1.587. For any other number, use the decimal to fraction calculator.
| Fraction, in | 64ths | Decimal, in | mm |
|---|---|---|---|
| 1/64 | 1/64 | 0.0156 | 0.397 |
| 1/32 | 2/64 | 0.0313 | 0.794 |
| 3/64 | 3/64 | 0.0469 | 1.191 |
| 1/16 | 4/64 | 0.0625 | 1.588 |
| 5/64 | 5/64 | 0.0781 | 1.984 |
| 3/32 | 6/64 | 0.0938 | 2.381 |
| 7/64 | 7/64 | 0.1094 | 2.778 |
| 1/8 | 8/64 | 0.1250 | 3.175 |
| 9/64 | 9/64 | 0.1406 | 3.572 |
| 5/32 | 10/64 | 0.1563 | 3.969 |
| 11/64 | 11/64 | 0.1719 | 4.366 |
| 3/16 | 12/64 | 0.1875 | 4.763 |
| 13/64 | 13/64 | 0.2031 | 5.159 |
| 7/32 | 14/64 | 0.2188 | 5.556 |
| 15/64 | 15/64 | 0.2344 | 5.953 |
| 1/4 | 16/64 | 0.2500 | 6.350 |
| 17/64 | 17/64 | 0.2656 | 6.747 |
| 9/32 | 18/64 | 0.2813 | 7.144 |
| 19/64 | 19/64 | 0.2969 | 7.541 |
| 5/16 | 20/64 | 0.3125 | 7.938 |
| 21/64 | 21/64 | 0.3281 | 8.334 |
| 11/32 | 22/64 | 0.3438 | 8.731 |
| 23/64 | 23/64 | 0.3594 | 9.128 |
| 3/8 | 24/64 | 0.3750 | 9.525 |
| 25/64 | 25/64 | 0.3906 | 9.922 |
| 13/32 | 26/64 | 0.4063 | 10.319 |
| 27/64 | 27/64 | 0.4219 | 10.716 |
| 7/16 | 28/64 | 0.4375 | 11.113 |
| 29/64 | 29/64 | 0.4531 | 11.509 |
| 15/32 | 30/64 | 0.4688 | 11.906 |
| 31/64 | 31/64 | 0.4844 | 12.303 |
| 1/2 | 32/64 | 0.5000 | 12.700 |
| 33/64 | 33/64 | 0.5156 | 13.097 |
| 17/32 | 34/64 | 0.5313 | 13.494 |
| 35/64 | 35/64 | 0.5469 | 13.891 |
| 9/16 | 36/64 | 0.5625 | 14.288 |
| 37/64 | 37/64 | 0.5781 | 14.684 |
| 19/32 | 38/64 | 0.5938 | 15.081 |
| 39/64 | 39/64 | 0.6094 | 15.478 |
| 5/8 | 40/64 | 0.6250 | 15.875 |
| 41/64 | 41/64 | 0.6406 | 16.272 |
| 21/32 | 42/64 | 0.6563 | 16.669 |
| 43/64 | 43/64 | 0.6719 | 17.066 |
| 11/16 | 44/64 | 0.6875 | 17.463 |
| 45/64 | 45/64 | 0.7031 | 17.859 |
| 23/32 | 46/64 | 0.7188 | 18.256 |
| 47/64 | 47/64 | 0.7344 | 18.653 |
| 3/4 | 48/64 | 0.7500 | 19.050 |
| 49/64 | 49/64 | 0.7656 | 19.447 |
| 25/32 | 50/64 | 0.7813 | 19.844 |
| 51/64 | 51/64 | 0.7969 | 20.241 |
| 13/16 | 52/64 | 0.8125 | 20.638 |
| 53/64 | 53/64 | 0.8281 | 21.034 |
| 27/32 | 54/64 | 0.8438 | 21.431 |
| 55/64 | 55/64 | 0.8594 | 21.828 |
| 7/8 | 56/64 | 0.8750 | 22.225 |
| 57/64 | 57/64 | 0.8906 | 22.622 |
| 29/32 | 58/64 | 0.9063 | 23.019 |
| 59/64 | 59/64 | 0.9219 | 23.416 |
| 15/16 | 60/64 | 0.9375 | 23.813 |
| 61/64 | 61/64 | 0.9531 | 24.209 |
| 31/32 | 62/64 | 0.9688 | 24.606 |
| 63/64 | 63/64 | 0.9844 | 25.003 |
| 1 | 64/64 | 1.0000 | 25.400 |
Decimal to fraction chart
Read the same chart from the decimal column: find the decimal nearest to yours and take the fraction on its row. 0.3 inch falls between 0.2969 (19/64) and 0.3125 (5/16); on a tape that reads in sixteenths it is 5/16, 0.0125 in longer.
How to use the chart
The same sizes turn up in two forms: drill and bit sizes in fractions, caliper and drawing sizes in decimals. Fractions run down the chart in order, so the decimal column also runs in order and a decimal finds its fraction by size. The millimeter column turns a fractional size into metric for a metric drill or rule.
What is 1/8 as a decimal?
1/8 inch is 0.1250 in, or 3.175 mm.
What is 3/4 in decimal?
3/4 is 0.7500; 1/4 is 0.2500. In millimeters, 3/4 inch is 19.050 mm.
What is 7/8 as a decimal?
7/8 is 0.8750, or 22.225 mm.
What is 1 1/8 in decimal form?
1 1/8 is 1.1250: the whole number stays, and 1/8 adds 0.1250.
How do you convert a fraction to a decimal?
Divide the top number by the bottom: 5/16 = 5 รท 16 = 0.3125. For a mixed number, add the whole part: 2 5/16 = 2.3125.