Measuring tools, printable rulers and graph paper
Read the marks of a tape measure or ruler, print a ruler or graph paper at true size and convert fractions of an inch to decimals and millimeters. Every printable sheet carries a 100 mm and 4 inch check bar, so you can measure the printout before you rely on it.
How to read a measurement
- How to read a rulerAn inch ruler marks 1/2, 1/4, 1/8 and 1/16 inch by mark length; a metric ruler marks cm and mm. Chart of every 1/16 inch in decimals and mm, and a trainer.
- How to read a tape measureEach inch of a tape is split into 16 parts: count the small marks past the last inch and reduce, so 5 marks is 5/16. Tap any mark to see it in decimals and mm.
Rulers and protractor
- Online rulerA ruler on your screen in inches and cm. Hold a bank card to the screen and match it once, and the ruler shows actual size on that screen.
- Printable protractorPrint a 180° or 360° protractor at the radius you need, with 1° marks and both number scales, and a 100 mm bar to check the print scale.
- Printable rulerPrint a 12 inch or 30 cm ruler at actual size on Letter or A4: inches to 1/16 or 1/32 with cm on the other edge, and a 100 mm bar to check the scale.
- Printable tape measurePrint a 60 inch or 150 cm tape measure as strips on one Letter or A4 sheet, cut and tape them into a flexible tape, and check the scale with the 100 mm bar.
Graph paper
Charts
- Fraction to decimal chartEvery 1/64 inch from 1/64 to 1 inch as a decimal and in millimeters, rounded exactly from 1 in = 25.4 mm. Read it both ways: decimal to fraction too.
- Inches to mm chartInches to millimeters by 1/16 inch to 2 inches and by 1/4 inch to 12, and mm to inches with the nearest 1/16, 1/32 and 1/64 inch, from 25.4 mm exactly.