Online ruler in inches and cm

A web page cannot know how big your screen's pixels are, so an online ruler is only actual size after you calibrate it. Hold any bank card to the screen, press − or + until the bar matches the card's long side, and the ruler shows true inches and centimeters on this screen.

Scale

Not calibrated: not actual size yet

0123456

Calibrate to actual size

Hold to the screen

Put the card’s long side against the bar below, left ends together, and press − or + until the bar ends exactly at its other end.

card

Now drawn at the browser’s 96 pixels per inch.

Why a bank card

Bank and ID cards are made in the ID-1 size of ISO/IEC 7810: 85.60 mm long and 53.98 mm wide, as printed in ICAO Doc 9303 and in card makers' specification sheets. Any such card is a ruler you already carry.

Calibration is saved in this browser for this screen. A different screen, a zoomed page or a changed display scale needs a new calibration.

Without a card

Use something else of known size: a printed sheet's 100 mm check bar, or a US Letter sheet, 8.5 inches wide. Hold it to the screen and set its length in the box.

Uncalibrated, the page draws the browser's CSS inch of 96 pixels, which on most screens is not a real inch, and it says so above the ruler.

How do I make an online ruler actual size?

To make the online ruler actual size, calibrate it: match the bar to the long side of a bank card (85.60 mm) held to the screen. Until then no web page can show actual size, because it cannot know the size of your pixels.

How many cm are in a 12 inch ruler?

A 12 inch ruler is 304.8 mm, or 30.48 cm: an inch is exactly 2.54 cm.

How do you read an inch ruler?

On an inch ruler whole inches are numbered; the longest mark between is 1/2, then 1/4, 1/8 and 1/16 get shorter. The ruler explainer shows each mark.

Is an online ruler accurate without calibration?

No, an online ruler is not accurate until it is calibrated. Screens differ in pixels per inch, and the browser's inch is a fixed 96 pixels. This page marks the ruler “not calibrated” until you match the card.