Printable ruler (inches, cm and mm)

A 12 inch ruler prints on one Letter or A4 sheet as two 6 inch strips with centimeters on the other edge: cut them out and tape them end to end. Print at 100% (Actual size) and check the 100 mm and 4 inch bars on the sheet before you use it.

Main scale
in

Up to 40 in fits on one Letter sheet

Marks
Other edge
Paper
Result
2 strips

12 in: 2 strips of up to 6 in. Cut them out and tape them end to end.

Length
12 in (30.48 cm)
Smallest mark
1/16 in (1.588 mm)
1234501234567891011121314strip 1 of 2 · 0–6 in7891011161718192021222324252627282930strip 2 of 2 · 6–12 inCut on the dashed lines and tape the strips end to end in order, without overlap: each strip starts where the one before ends.Measure: 100 mmMeasure: 4 inBank card, long side: 85.60 mm12 in ruler, 1/16 in marks + cm · LetterPrint at 100% (Actual size), not Fit to page.Bars too short or long? See the page for the fix.CC0 · free to copy, print and share · calculate.diy

Letter PDF

How it is calculated

  1. Across the sheet in landscape: 266.7 mm inside the margins, room for 10 in per strip.
  2. 12 in needs 2 strips; split equally: 6 + 6 in.
  3. Print at 100% (Actual size) and measure the 100 mm bar before cutting.
mm

Measure the bar at the foot of the printout

True to size: the printer kept 100% within half a millimeter.

Why a printout comes out the wrong size

Fit to page, Shrink to fit or Scale to fit makes the printer shrink the sheet to its own printable area. Choose Actual size or 100% in the print dialog.

A4 printed on Letter, or the other way round, is scaled to fit the other paper. Pick the PDF for the paper in your printer.

Measure the 100 mm bar. If it prints as 97 mm the scale was 97%; type what you measured in the box below the preview and it gives the scale to set.

Make the paper ruler last

Print on card stock, or glue the strip to card or thin wood before cutting. Cut on the dashed line; a cut that wanders off the line moves the edge, not the marks, so measure from the marks.

Tape the strips end to end on the back so the last mark of the first strip meets the first mark of the next.

Strips for each length and paper

Strips a ruler is cut into to fit across the sheet in landscape with 1/4 in margins, and the longest that fits on one sheet; paper sizes as published
LengthLetterA4Legal11×17
6 in1 × 6 in1 × 6 in1 × 6 in1 × 6 in
12 in2 × 6 in2 × 6 in1 × 12 in1 × 12 in
15 cm1 × 15 cm1 × 15 cm1 × 15 cm1 × 15 cm
30 cm2 × 15 cm2 × 15 cm1 × 30 cm1 × 30 cm
Most on one sheet40 in40 in52 in96 in

How do I print a ruler at actual size?

To print a ruler at actual size, print the PDF with scale set to 100% or Actual size, not Fit to page, then measure the 100 mm bar on the sheet. If it is off, enter what you measured and set the scale it gives.

Can I print a millimeter ruler?

Yes, the printable ruler makes a millimeter ruler: choose centimeters as the main scale. Every millimeter is marked, the 5 mm marks are longer and every centimeter is numbered.

How do I print a 12 inch ruler?

A 12 inch ruler does not fit across one sheet: on Letter or A4 in landscape inside 1/4 inch margins a ruler fits 10 inches across, so 12 inches prints as two 6 inch strips. Cut them out and tape them end to end, the 6 of the first strip meeting the 6 of the second.

Can I print a ruler with inches and centimeters?

Yes, the printable inch ruler carries a centimeter scale on its other edge by default, both counted from the same zero.

Is a printable ruler accurate?

A printable ruler is only as accurate as the printer's scale: measure the check bar first. The marks are drawn from exact millimeter positions; at 100% the printer's own accuracy, paper stretch and the cut are the limit.

Ready-made PDFs: Letter, A4. Free to print, copy and share under CC0. Sizes of the paper are the published figures of the documents below.