Printable tape measure (60 in or 150 cm)

A 60 inch tape prints as six 10 inch strips on one Letter or A4 sheet in landscape. Cut them out and tape them end to end in order, each strip starting where the last one ends, for a paper tape you can wrap around a pipe, a post or a waist.

Main scale
in

Up to 70 in fits on one Letter sheet

Marks
Paper
Result
6 strips

60 in: 6 strips of up to 10 in. Cut them out and tape them end to end.

Length
60 in (152.4 cm)
Smallest mark
1/16 in (1.588 mm)
123456789strip 1 of 6 · 0–10 in111213141516171819strip 2 of 6 · 10–20 in212223242526272829strip 3 of 6 · 20–30 in313233343536373839strip 4 of 6 · 30–40 in414243444546474849strip 5 of 6 · 40–50 in515253545556575859strip 6 of 6 · 50–60 inCut on the dashed lines and tape the strips end to end in order, without overlap: each strip starts where the one before ends.Measure: 100 mmMeasure: 4 in60 in tape, 1/16 in marks · LetterPrint at 100% (Actual size), not Fit to page.Bars too short or long? See the page for the fix.CC0 · free to copy, print and share · calculate.diy

Letter PDF

How it is calculated

  1. Across the sheet in landscape: 266.7 mm inside the margins, room for 10 in per strip.
  2. 60 in needs 6 strips; split equally: 10 + 10 + 10 + 10 + 10 + 10 in.
  3. Print at 100% (Actual size) and measure the 100 mm bar before cutting.
mm

Measure the bar at the foot of the printout

True to size: the printer kept 100% within half a millimeter.

How to put the tape together

Print at 100% (Actual size) and check the 100 mm bar first.

Cut each strip on its dashed outline. Lay strip 2 next to strip 1 so its first mark meets the last mark of strip 1, and tape the joint on the back. Repeat for every strip.

For a tape that bends around round things, print on plain paper; for one that stays flat, print on card stock.

Measure around a pipe or post

Wrap the tape once around and read where the 0 meets the tape. That is the circumference; divide by π (3.1416) for the diameter. A pipe that measures 3 5/16 inches around is 3.3125 ÷ 3.1416 = 1.054 in across.

Strips for each length and paper

Strips a tape is cut into to fit across the sheet in landscape with 1/4 in margins, and the longest that fits on one sheet; paper sizes as published
LengthLetterA4Legal11×17
36 in4 × 9 in4 × 9 in3 × 12 in3 × 12 in
60 in6 × 10 in6 × 10 in5 × 12 in4 × 15 in
100 cm4 × 25 cm4 × 25 cm4 × 25 cm3 × 34 cm
150 cm6 × 25 cm6 × 25 cm5 × 30 cm4 × 38 cm
Most on one sheet70 in60 in91 in144 in

How do you make a tape measure out of paper?

To make a paper tape measure, print the strips at 100%, cut them out and tape them end to end in order. Check the 100 mm bar on the sheet before you rely on the tape.

How many sheets do I need for a 60 inch tape?

A 60 inch paper tape needs one sheet. In landscape on Letter or A4 with 1/4 inch margins, a strip holds 10 inches and six strips fit on the sheet.

How do you read a tape measure?

To read a tape measure, read the last inch number, then count the sixteenth marks after it: 5 marks past 7 is 7 5/16 inches. The tape explainer shows every mark.

Ready-made PDFs: Letter, A4. Free to print, copy and share under CC0. Sizes of the paper are the published figures of the documents below.