What size drain pipe for a bathtub?
A bathtub needs at least a 1-1/2 inch trap and drain under both the International Plumbing Code (IPC) and the Uniform Plumbing Code (UPC). It counts as 2 drainage fixture units under both codes. Your state or city may use either code, with amendments.
Bathtub drain size in each document
| Code | Trap, in | DFU | Document |
|---|---|---|---|
| IPC | 1-1/2 | 2 | NC Building Code Council / NC Office of Administrative Hearings |
| UPC | 1-1/2 | 2 | Minnesota Office of the Revisor of Statutes / Dept. of Labor and Industry |
| UPC | 1-1/2 | 2 | Public Health - Seattle & King County, WA |
Which code applies where you live
Under the IPC the same 1-1/2 inch trap serves a shower, a kitchen sink, a laundry or utility sink and a dishwasher. The model codes are adopted state by state. UPC: AK, CA, HI, IA, ID, MN, MT, NM, OR, WA. IPC: CO, FL, GA, IN, LA, MD, MI, NC, NY, OH, PA, TN, UT, VA. Cities and counties can amend them; the local building department has the final word.
Before you plumb the drain
The trap size is the smallest the code allows for this fixture. A drain line that collects several fixtures is sized from the sum of their drainage fixture units, and every drain needs a vent and a minimum slope; see the drain size chart and the drain slope calculator.