Schedule 40 vs Schedule 80 PVC pipe
Schedule 40 and Schedule 80 PVC pipe of one nominal size have the same outside diameter; Schedule 80 has the thicker wall. 1/2 inch Schedule 40 has a 0.109 in wall and a 0.602 in inside diameter, Schedule 80 a 0.147 in wall and a 0.526 in inside diameter; they are rated 600 and 850 psi (water, non-shock, at 73°F). The smaller bore holds 24% less water per foot.
Schedule 40 vs Schedule 80 PVC pipe by size
| Nominal size | OD, in | Schedule 40 wall | Schedule 80 wall | Schedule 40 ID | Schedule 80 ID | Schedule 40 gal/ft | Schedule 80 gal/ft | Schedule 40 psi | Schedule 80 psi |
|---|---|---|---|---|---|---|---|---|---|
| 1/4″ | 0.540 | 0.088 | 0.119 | 0.344 | 0.282 | 0.0048 | 0.0032 | 780 | 1,130 |
| 3/8″ | 0.675 | 0.091 | 0.126 | 0.473 | 0.403 | 0.0091 | 0.0066 | 620 | 920 |
| 1/2″ | 0.840 | 0.109 | 0.147 | 0.602 | 0.526 | 0.0148 | 0.0113 | 600 | 850 |
| 3/4″ | 1.050 | 0.113 | 0.154 | 0.804 | 0.722 | 0.0264 | 0.0213 | 480 | 690 |
| 1″ | 1.315 | 0.133 | 0.179 | 1.029 | 0.936 | 0.0432 | 0.0357 | 450 | 630 |
| 1-1/4″ | 1.660 | 0.140 | 0.191 | 1.360 | 1.255 | 0.0755 | 0.0643 | 370 | 520 |
| 1-1/2″ | 1.900 | 0.145 | 0.200 | 1.590 | 1.476 | 0.1031 | 0.0889 | 330 | 470 |
| 2″ | 2.375 | 0.154 | 0.218 | 2.047 | 1.913 | 0.171 | 0.1493 | 280 | 400 |
| 2-1/2″ | 2.875 | 0.203 | 0.276 | 2.445 | 2.290 | 0.2439 | 0.214 | 300 | 420 |
| 3″ | 3.500 | 0.216 | 0.300 | 3.042 | 2.864 | 0.3776 | 0.3347 | 260 | 370 |
| 3-1/2″ | 4.000 | 0.226 | 0.318 | 3.521 | 3.326 | 0.5058 | 0.4513 | 240 | 350 |
| 4″ | 4.500 | 0.237 | 0.337 | 3.998 | 3.786 | 0.6521 | 0.5848 | 220 | 320 |
| 5″ | 5.563 | 0.258 | 0.375 | 5.016 | 4.768 | 1.0265 | 0.9275 | 190 | 290 |
| 6″ | 6.625 | 0.280 | 0.432 | 6.031 | 5.709 | 1.484 | 1.3298 | 180 | 280 |
| 8″ | 8.625 | 0.322 | 0.500 | 7.942 | 7.565 | 2.5735 | 2.3349 | 160 | 250 |
| 10″ | 10.750 | 0.365 | 0.593 | 9.976 | 9.493 | 4.0604 | 3.6768 | 140 | 230 |
| 12″ | 12.750 | 0.406 | 0.687 | 11.889 | 11.294 | 5.767 | 5.2042 | 130 | 230 |
How the difference between Schedule 40 and Schedule 80 is worked out
The inside diameters are the ones the document prints (an average, so they are a little smaller than OD − 2 × minimum wall); only where a document prints none is the inside diameter OD − 2 × wall. The water a foot of pipe holds is π × ID² ÷ 4 × 12 ÷ 231 gallons: for 1/2 inch, 0.0148 gallons in Schedule 40 and 0.0113 in Schedule 80.
Which schedule to choose
Both schedules of one nominal size fit the same fittings, because the outside diameter is the same; only the wall differs. The thicker wall of Schedule 80 gives it a higher published pressure rating and a smaller bore, so a run of Schedule 80 carries a little less water than the same run of Schedule 40.
Which schedule a job needs is set by the local plumbing code, the pressure and temperature of the system and the manufacturer’s instructions. Check the print on the pipe: it names the schedule and the standard it is made to.