3/4 inch PVC pipe dimensions

3/4 inch Schedule 40 PVC pipe has an outside diameter of 1.050 in (26.7 mm) and a 0.804 in (20.4 mm) average inside diameter. Schedule 80 has a 0.154 in wall and a 0.722 in inside diameter. PVC pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule.

3/4 inch PVC pipe dimensions by schedule

3/4 inch PVC pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
VariantOD, inOD, mmMin. wall, inID, inID, mmGallons per footWeight, lb/ftMax pressure, psi
Schedule 401.05026.70.1130.804 average20.40.02640.226480
Schedule 801.05026.70.1540.722 average18.30.02130.314690

Maximum working pressure as the document gives it: water, non-shock, at 73°F.

END VIEW, TO SCALEOD 1.050 inID 0.804 in20.4 mmwall 0.1133/4 in Schedule 40 PVC pipe

How much water does 3/4 inch PVC pipe hold?

One foot of 3/4 inch Schedule 40 PVC pipe holds 0.0264 gallons (0.100 L) of water; 100 feet holds 2.64 gallons.

Water held by 3/4 inch PVC pipe by length, from the inside diameter of each variant
LengthSchedule 40, galSchedule 80, gal
1 ft0.02640.0213
10 ft0.260.21
25 ft0.660.53
50 ft1.321.06
100 ft2.642.13

For a run of mixed sizes, use the pipe volume calculator.

Is 3/4 inch PVC pipe the same size as other 3/4″ pipe?

3/4 inch PVC pipe has the same 1.050 in outside diameter as 3/4″ steel pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 3/4″ pipe by material
PipeOD, inOD, mm
PVC pipe (this page)1.05026.7
copper pipe0.87522.2
PEX pipe0.87522.2
steel pipe1.05026.7

3/4 inch PVC pipe compared with the sizes next to it

The next size up, 1 inch, is 0.265 in larger outside and holds 64% more water per foot at Schedule 40.

PVC pipe one size down, this size and one size up at Schedule 40: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
1/2″0.8400.6020.0148
3/4″ (this page)1.0500.8040.0264
1″1.3151.0290.0432

How to tell 3/4 inch PVC pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the wall. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 1.050 in (26.7 mm) is 3/4 inch PVC pipe or steel pipe of the same nominal size; the print on the pipe gives the schedule. The pipe size identifier matches a measurement against every size and material.