3/4 inch copper pipe dimensions

3/4 inch Type L copper pipe has an outside diameter of 0.875 in (22.2 mm) and a 0.785 in (19.9 mm) inside diameter. Type K has a 0.065 in wall and a 0.745 in inside diameter; Type M has a 0.032 in wall and a 0.811 in inside diameter. Copper tube uses copper tube sizes (CTS): Types K, L and M of one nominal size share the outside diameter and differ in wall thickness.

3/4 inch copper pipe dimensions by type

3/4 inch copper pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
TypeOD, inOD, mmWall, inID, inID, mmGallons per footWeight, lb/ft
Type K0.87522.20.0650.74518.90.02260.641
Type L0.87522.20.0450.78519.90.02510.455
Type M0.87522.20.0320.81120.60.02680.328
END VIEW, TO SCALEOD 0.875 inID 0.785 in19.9 mmwall 0.0453/4 in Type L copper pipe

How much water does 3/4 inch copper pipe hold?

One foot of 3/4 inch Type L copper pipe holds 0.0251 gallons (0.095 L) of water; 100 feet holds 2.51 gallons.

Water held by 3/4 inch copper pipe by length, from the inside diameter of each type
LengthType K, galType L, galType M, gal
1 ft0.02260.02510.0268
10 ft0.230.250.27
25 ft0.570.630.67
50 ft1.131.261.34
100 ft2.262.512.68

For a run of mixed sizes, use the pipe volume calculator.

Is 3/4 inch copper pipe the same size as other 3/4″ pipe?

3/4 inch copper pipe has the same 0.875 in outside diameter as 3/4″ PEX pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 3/4″ pipe by material
PipeOD, inOD, mm
copper pipe (this page)0.87522.2
PEX pipe0.87522.2
PVC pipe1.05026.7
steel pipe1.05026.7

3/4 inch copper pipe compared with the sizes next to it

The next size up, 1 inch, is 0.250 in larger outside and holds 70% more water per foot at Type L.

Copper pipe one size down, this size and one size up at Type L: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
5/8″0.7500.6660.0181
3/4″ (this page)0.8750.7850.0251
1″1.1251.0250.0429

How to tell 3/4 inch copper pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the type. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 0.875 in (22.2 mm) is 3/4 inch copper pipe or PEX pipe of the same nominal size; the print on the pipe gives the type. The pipe size identifier matches a measurement against every size and material.