Pipe velocity calculator
Velocity in feet per second = gpm × 231 ÷ 60 ÷ (π × ID² ÷ 4) ÷ 12, about 0.4085 × gpm ÷ ID² with the inside diameter in inches. 5 gpm through 3/4 inch SDR 9 PEX pipe (inside diameter 0.681 in) moves at 4.4 ft/s, within the 10 ft/s Uponor North America gives for water service and domestic cold water.
0 uses the 0.681 in of 3/4 in SDR 9 PEX pipe
5 gpm through 3/4 in SDR 9 PEX pipe moves at 4.4 ft/s, within the 10 ft/s Uponor North America gives for water service and domestic cold water.
- Velocity, m/s
- 1.34
- Published limit
- 10 ft/s
- Share of the limit
- 44%
- Flow at the limit
- 11.4 gpm
- Inside diameter
- 0.681 in
How it is calculated
- Bore area = π × 0.681² ÷ 4 = 0.3642 in² (inside diameter = OD − 2 × wall).
- Velocity = 5 gpm × 231 in³ ÷ 60 s ÷ 0.3642 in² ÷ 12 = 4.404 ft/s.
- Limit: 10 ft/s for water service and domestic cold water (Uponor North America).
How to calculate water velocity in a pipe
The worked numbers use the calculator's default: 5 gpm through 3/4 inch SDR 9 PEX pipe.
Step 1: Area of the bore
Area (in²) = π × ID² ÷ 4
Example π × 0.681² ÷ 4 = 0.3642 in²
Step 2: Flow in cubic inches per second
in³/s = gpm × 231 ÷ 60
Example 5 × 231 ÷ 60 = 19.25 in³/s
Step 3: Velocity
Velocity (ft/s) = in³/s ÷ area ÷ 12
Example 19.25 ÷ 0.3642 ÷ 12 = 4.404 ft/s
The published limit for water service and domestic cold water is 10 ft/s (Uponor North America); this pipe reaches it at 11.4 gpm.
Maximum flow of common pipe sizes at the published velocity limit
The flow in gallons per minute at which each pipe reaches the velocity limit its maker or trade association publishes for cold and for hot water. Steel pipe is left out: the documents checked give no velocity limit for it. A dash means the document gives no limit for that water.
| Pipe | ID, in | Cold limit, ft/s | Cold, gpm | Hot limit, ft/s | Hot, gpm | Limits from |
|---|---|---|---|---|---|---|
| 1/2″ SDR 9 PEX pipe | 0.485 | 10 | 5.8 | 8 | 4.6 | Uponor North America |
| 3/4″ SDR 9 PEX pipe | 0.681 | 10 | 11.4 | 8 | 9.1 | Uponor North America |
| 1″ SDR 9 PEX pipe | 0.875 | 10 | 18.7 | 8 | 15 | Uponor North America |
| 1-1/4″ SDR 9 PEX pipe | 1.069 | 10 | 28 | 8 | 22.4 | Uponor North America |
| 1-1/2″ SDR 9 PEX pipe | 1.263 | 10 | 39 | 8 | 31.2 | Uponor North America |
| 2″ SDR 9 PEX pipe | 1.653 | 10 | 66.9 | 8 | 53.5 | Uponor North America |
| 1/2″ Type L copper pipe | 0.545 | 8 | 5.8 | 5 | 3.6 | Copper Development Association |
| 3/4″ Type L copper pipe | 0.785 | 8 | 12.1 | 5 | 7.5 | Copper Development Association |
| 1″ Type L copper pipe | 1.025 | 8 | 20.6 | 5 | 12.9 | Copper Development Association |
| 1-1/4″ Type L copper pipe | 1.265 | 8 | 31.3 | 5 | 19.6 | Copper Development Association |
| 1-1/2″ Type L copper pipe | 1.505 | 8 | 44.4 | 5 | 27.7 | Copper Development Association |
| 2″ Type L copper pipe | 1.985 | 8 | 77.2 | 5 | 48.2 | Copper Development Association |
| 1/2″ Schedule 40 PVC pipe | 0.602 | 5 | 4.4 | — | — | Charlotte Pipe and Foundry Co. |
| 3/4″ Schedule 40 PVC pipe | 0.804 | 5 | 7.9 | — | — | Charlotte Pipe and Foundry Co. |
| 1″ Schedule 40 PVC pipe | 1.029 | 5 | 13 | — | — | Charlotte Pipe and Foundry Co. |
| 1-1/4″ Schedule 40 PVC pipe | 1.360 | 5 | 22.6 | — | — | Charlotte Pipe and Foundry Co. |
| 1-1/2″ Schedule 40 PVC pipe | 1.590 | 5 | 30.9 | — | — | Charlotte Pipe and Foundry Co. |
| 2″ Schedule 40 PVC pipe | 2.047 | 5 | 51.3 | — | — | Charlotte Pipe and Foundry Co. |
Why pipe makers limit water velocity
Fast water is noisy, wears the inside of the pipe and makes a stronger pressure surge (water hammer) when a valve closes quickly. Pipe makers and trade associations therefore publish a maximum velocity: for copper tube, 8 ft/s for cold water and 5 ft/s for hot water up to approximately 140°F (Copper Development Association); the calculator compares the result with the published limit for the material you choose.
Hot water gets a lower limit than cold in copper and PEX; the PVC limit is for cold water. The documents checked give no limit for steel pipe, so for steel the calculator gives the velocity without a comparison.