1-1/2 inch PVC pipe dimensions

1-1/2 inch Schedule 40 PVC pipe has an outside diameter of 1.900 in (48.3 mm) and a 1.590 in (40.4 mm) average inside diameter. Schedule 80 has a 0.200 in wall and a 1.476 in inside diameter. PVC pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule.

1-1/2 inch PVC pipe dimensions by schedule

1-1/2 inch PVC pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
VariantOD, inOD, mmMin. wall, inID, inID, mmGallons per footWeight, lb/ftMax pressure, psi
Schedule 401.90048.30.1451.590 average40.40.10310.537330
Schedule 801.90048.30.2001.476 average37.50.08890.793470

Maximum working pressure as the document gives it: water, non-shock, at 73°F.

END VIEW, TO SCALEOD 1.900 inID 1.590 in40.4 mmwall 0.1451-1/2 in Schedule 40 PVC pipe

How much water does 1-1/2 inch PVC pipe hold?

One foot of 1-1/2 inch Schedule 40 PVC pipe holds 0.1031 gallons (0.390 L) of water; 100 feet holds 10.31 gallons.

Water held by 1-1/2 inch PVC pipe by length, from the inside diameter of each variant
LengthSchedule 40, galSchedule 80, gal
1 ft0.10310.0889
10 ft1.030.89
25 ft2.582.22
50 ft5.164.44
100 ft10.318.89

For a run of mixed sizes, use the pipe volume calculator.

Is 1-1/2 inch PVC pipe the same size as other 1-1/2″ pipe?

1-1/2 inch PVC pipe has the same 1.900 in outside diameter as 1-1/2″ steel pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1-1/2″ pipe by material
PipeOD, inOD, mm
PVC pipe (this page)1.90048.3
copper pipe1.62541.3
PEX pipe1.62541.3
steel pipe1.90048.3

1-1/2 inch PVC pipe compared with the sizes next to it

The next size up, 2 inch, is 0.475 in larger outside and holds 66% more water per foot at Schedule 40.

PVC pipe one size down, this size and one size up at Schedule 40: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
1-1/4″1.6601.3600.0755
1-1/2″ (this page)1.9001.5900.1031
2″2.3752.0470.171

How to tell 1-1/2 inch PVC pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the wall. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 1.900 in (48.3 mm) is 1-1/2 inch PVC pipe or steel pipe of the same nominal size; the print on the pipe gives the schedule. The pipe size identifier matches a measurement against every size and material.