1-1/2 inch copper pipe dimensions

1-1/2 inch Type L copper pipe has an outside diameter of 1.625 in (41.3 mm) and a 1.505 in (38.2 mm) inside diameter. Type K has a 0.072 in wall and a 1.481 in inside diameter; Type M has a 0.049 in wall and a 1.527 in inside diameter; DWV has a 0.042 in wall and a 1.541 in inside diameter. Copper tube uses copper tube sizes (CTS): Types K, L and M of one nominal size share the outside diameter and differ in wall thickness.

1-1/2 inch copper pipe dimensions by type

1-1/2 inch copper pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
TypeOD, inOD, mmWall, inID, inID, mmGallons per footWeight, lb/ft
Type K1.62541.30.0721.48137.60.08951.360
Type L1.62541.30.0601.50538.20.09241.140
Type M1.62541.30.0491.52738.80.09510.940
DWV1.62541.30.0421.54139.10.09690.809
END VIEW, TO SCALEOD 1.625 inID 1.505 in38.2 mmwall 0.0601-1/2 in Type L copper pipe

How much water does 1-1/2 inch copper pipe hold?

One foot of 1-1/2 inch Type L copper pipe holds 0.0924 gallons (0.350 L) of water; 100 feet holds 9.24 gallons.

Water held by 1-1/2 inch copper pipe by length, from the inside diameter of each type
LengthType K, galType L, galType M, galDWV, gal
1 ft0.08950.09240.09510.0969
10 ft0.890.920.950.97
25 ft2.242.312.382.42
50 ft4.474.624.764.84
100 ft8.959.249.519.69

For a run of mixed sizes, use the pipe volume calculator.

Is 1-1/2 inch copper pipe the same size as other 1-1/2″ pipe?

1-1/2 inch copper pipe has the same 1.625 in outside diameter as 1-1/2″ PEX pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1-1/2″ pipe by material
PipeOD, inOD, mm
copper pipe (this page)1.62541.3
PEX pipe1.62541.3
PVC pipe1.90048.3
steel pipe1.90048.3

1-1/2 inch copper pipe compared with the sizes next to it

The next size up, 2 inch, is 0.500 in larger outside and holds 74% more water per foot at Type L.

Copper pipe one size down, this size and one size up at Type L: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
1-1/4″1.3751.2650.0653
1-1/2″ (this page)1.6251.5050.0924
2″2.1251.9850.1608

How to tell 1-1/2 inch copper pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the type. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 1.625 in (41.3 mm) is 1-1/2 inch copper pipe or PEX pipe of the same nominal size; the print on the pipe gives the type. The pipe size identifier matches a measurement against every size and material.