1-1/4 inch copper pipe dimensions

1-1/4 inch Type L copper pipe has an outside diameter of 1.375 in (34.9 mm) and a 1.265 in (32.1 mm) inside diameter. Type K has a 0.065 in wall and a 1.245 in inside diameter; Type M has a 0.042 in wall and a 1.291 in inside diameter; DWV has a 0.040 in wall and a 1.295 in inside diameter. Copper tube uses copper tube sizes (CTS): Types K, L and M of one nominal size share the outside diameter and differ in wall thickness.

1-1/4 inch copper pipe dimensions by type

1-1/4 inch copper pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
TypeOD, inOD, mmWall, inID, inID, mmGallons per footWeight, lb/ft
Type K1.37534.90.0651.24531.60.06321.040
Type L1.37534.90.0551.26532.10.06530.884
Type M1.37534.90.0421.29132.80.0680.682
DWV1.37534.90.0401.29532.90.06840.650
END VIEW, TO SCALEOD 1.375 inID 1.265 in32.1 mmwall 0.0551-1/4 in Type L copper pipe

How much water does 1-1/4 inch copper pipe hold?

One foot of 1-1/4 inch Type L copper pipe holds 0.0653 gallons (0.247 L) of water; 100 feet holds 6.53 gallons.

Water held by 1-1/4 inch copper pipe by length, from the inside diameter of each type
LengthType K, galType L, galType M, galDWV, gal
1 ft0.06320.06530.0680.0684
10 ft0.630.650.680.68
25 ft1.581.631.71.71
50 ft3.163.263.43.42
100 ft6.326.536.86.84

For a run of mixed sizes, use the pipe volume calculator.

Is 1-1/4 inch copper pipe the same size as other 1-1/4″ pipe?

1-1/4 inch copper pipe has the same 1.375 in outside diameter as 1-1/4″ PEX pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1-1/4″ pipe by material
PipeOD, inOD, mm
copper pipe (this page)1.37534.9
PEX pipe1.37534.9
PVC pipe1.66042.2
steel pipe1.66042.2

1-1/4 inch copper pipe compared with the sizes next to it

The next size up, 1-1/2 inch, is 0.250 in larger outside and holds 42% more water per foot at Type L.

Copper pipe one size down, this size and one size up at Type L: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
1″1.1251.0250.0429
1-1/4″ (this page)1.3751.2650.0653
1-1/2″1.6251.5050.0924

How to tell 1-1/4 inch copper pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the type. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 1.375 in (34.9 mm) is 1-1/4 inch copper pipe or PEX pipe of the same nominal size; the print on the pipe gives the type. The pipe size identifier matches a measurement against every size and material.