1-1/4 inch steel pipe dimensions

1-1/4 inch Schedule 40 steel pipe has an outside diameter of 1.660 in (42.2 mm) and a 1.380 in (35.1 mm) inside diameter. Schedule 80 has a 0.191 in wall and a 1.278 in inside diameter. Steel pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule.

1-1/4 inch steel pipe dimensions by schedule

1-1/4 inch steel pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
VariantOD, inOD, mmWall, inID, inID, mmGallons per footWeight, lb/ft
Schedule 401.66042.20.1401.38035.10.07772.270
Schedule 801.66042.20.1911.27832.50.06663.000
END VIEW, TO SCALEOD 1.660 inID 1.380 in35.1 mmwall 0.1401-1/4 in Schedule 40 steel pipe

How much water does 1-1/4 inch steel pipe hold?

One foot of 1-1/4 inch Schedule 40 steel pipe holds 0.0777 gallons (0.294 L) of water; 100 feet holds 7.77 gallons.

Water held by 1-1/4 inch steel pipe by length, from the inside diameter of each variant
LengthSchedule 40, galSchedule 80, gal
1 ft0.07770.0666
10 ft0.780.67
25 ft1.941.67
50 ft3.883.33
100 ft7.776.66

For a run of mixed sizes, use the pipe volume calculator.

Is 1-1/4 inch steel pipe the same size as other 1-1/4″ pipe?

1-1/4 inch steel pipe has the same 1.660 in outside diameter as 1-1/4″ PVC pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1-1/4″ pipe by material
PipeOD, inOD, mm
steel pipe (this page)1.66042.2
copper pipe1.37534.9
PEX pipe1.37534.9
PVC pipe1.66042.2

1-1/4 inch steel pipe compared with the sizes next to it

The next size up, 1-1/2 inch, is 0.240 in larger outside and holds 36% more water per foot at Schedule 40.

Steel pipe one size down, this size and one size up at Schedule 40: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
1″1.3151.0490.0449
1-1/4″ (this page)1.6601.3800.0777
1-1/2″1.9001.6100.1058

How to tell 1-1/4 inch steel pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the wall. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 1.660 in (42.2 mm) is 1-1/4 inch steel pipe or PVC pipe of the same nominal size; the print on the pipe gives the schedule. The pipe size identifier matches a measurement against every size and material.