1-1/4 inch PVC pipe dimensions

1-1/4 inch Schedule 40 PVC pipe has an outside diameter of 1.660 in (42.2 mm) and a 1.360 in (34.5 mm) average inside diameter. Schedule 80 has a 0.191 in wall and a 1.255 in inside diameter. PVC pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule.

1-1/4 inch PVC pipe dimensions by schedule

1-1/4 inch PVC pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
VariantOD, inOD, mmMin. wall, inID, inID, mmGallons per footWeight, lb/ftMax pressure, psi
Schedule 401.66042.20.1401.360 average34.50.07550.450370
Schedule 801.66042.20.1911.255 average31.90.06430.654520

Maximum working pressure as the document gives it: water, non-shock, at 73°F.

END VIEW, TO SCALEOD 1.660 inID 1.360 in34.5 mmwall 0.1401-1/4 in Schedule 40 PVC pipe

How much water does 1-1/4 inch PVC pipe hold?

One foot of 1-1/4 inch Schedule 40 PVC pipe holds 0.0755 gallons (0.286 L) of water; 100 feet holds 7.55 gallons.

Water held by 1-1/4 inch PVC pipe by length, from the inside diameter of each variant
LengthSchedule 40, galSchedule 80, gal
1 ft0.07550.0643
10 ft0.750.64
25 ft1.891.61
50 ft3.773.21
100 ft7.556.43

For a run of mixed sizes, use the pipe volume calculator.

Is 1-1/4 inch PVC pipe the same size as other 1-1/4″ pipe?

1-1/4 inch PVC pipe has the same 1.660 in outside diameter as 1-1/4″ steel pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1-1/4″ pipe by material
PipeOD, inOD, mm
PVC pipe (this page)1.66042.2
copper pipe1.37534.9
PEX pipe1.37534.9
steel pipe1.66042.2

1-1/4 inch PVC pipe compared with the sizes next to it

The next size up, 1-1/2 inch, is 0.240 in larger outside and holds 37% more water per foot at Schedule 40.

PVC pipe one size down, this size and one size up at Schedule 40: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
1″1.3151.0290.0432
1-1/4″ (this page)1.6601.3600.0755
1-1/2″1.9001.5900.1031

How to tell 1-1/4 inch PVC pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the wall. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 1.660 in (42.2 mm) is 1-1/4 inch PVC pipe or steel pipe of the same nominal size; the print on the pipe gives the schedule. The pipe size identifier matches a measurement against every size and material.