1 inch PVC pipe dimensions

1 inch Schedule 40 PVC pipe has an outside diameter of 1.315 in (33.4 mm) and a 1.029 in (26.1 mm) average inside diameter. Schedule 80 has a 0.179 in wall and a 0.936 in inside diameter. PVC pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule.

1 inch PVC pipe dimensions by schedule

1 inch PVC pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
VariantOD, inOD, mmMin. wall, inID, inID, mmGallons per footWeight, lb/ftMax pressure, psi
Schedule 401.31533.40.1331.029 average26.10.04320.333450
Schedule 801.31533.40.1790.936 average23.80.03570.462630

Maximum working pressure as the document gives it: water, non-shock, at 73°F.

END VIEW, TO SCALEOD 1.315 inID 1.029 in26.1 mmwall 0.1331 in Schedule 40 PVC pipe

How much water does 1 inch PVC pipe hold?

One foot of 1 inch Schedule 40 PVC pipe holds 0.0432 gallons (0.164 L) of water; 100 feet holds 4.32 gallons.

Water held by 1 inch PVC pipe by length, from the inside diameter of each variant
LengthSchedule 40, galSchedule 80, gal
1 ft0.04320.0357
10 ft0.430.36
25 ft1.080.89
50 ft2.161.79
100 ft4.323.57

For a run of mixed sizes, use the pipe volume calculator.

Is 1 inch PVC pipe the same size as other 1″ pipe?

1 inch PVC pipe has the same 1.315 in outside diameter as 1″ steel pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1″ pipe by material
PipeOD, inOD, mm
PVC pipe (this page)1.31533.4
copper pipe1.12528.6
PEX pipe1.12528.6
steel pipe1.31533.4

1 inch PVC pipe compared with the sizes next to it

The next size up, 1-1/4 inch, is 0.345 in larger outside and holds 75% more water per foot at Schedule 40.

PVC pipe one size down, this size and one size up at Schedule 40: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
3/4″1.0500.8040.0264
1″ (this page)1.3151.0290.0432
1-1/4″1.6601.3600.0755

How to tell 1 inch PVC pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the wall. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 1.315 in (33.4 mm) is 1 inch PVC pipe or steel pipe of the same nominal size; the print on the pipe gives the schedule. The pipe size identifier matches a measurement against every size and material.