What size is my pipe?

Measure the outside of the pipe: an outside diameter of 1.050 in is 3/4 inch PVC pipe or 3/4 inch steel pipe, and a male thread of that diameter is 3/4 inch NPT. The nominal size is a name, so a 3/4 inch pipe measures about 1.050 in outside, not 3/4 in.

What to identify
How you measured
Units
in

Across the widest point, away from fittings

Result
3/4 in steel or PVC

An outside diameter of 1.050 in matches 3/4 inch steel pipe (1.050 in) and 3/4 inch PVC pipe (1.050 in).

Outside diameter used
1.050 in (26.7 mm)
Matching window
±0.020 in
3/4 in steel pipe
OD 1.050 in, exact
3/4 in PVC pipe
OD 1.050 in, exact
END VIEW, TO SCALEOD 1.050 inID 0.824 in20.9 mmwall 0.1133/4 in Schedule 40 steel pipe

How it is calculated

  1. Outside diameter as measured: 1.050 in.
  2. Every published size whose outside diameter is within ±0.020 in (the reading error of calipers) is a match, closest first.
  3. Pipes of different materials can share an outside diameter; the print on the pipe names its material and schedule or type.

Outside diameter of common pipe sizes, smallest first

Find the outside diameter closest to your measurement. Two pipes can share one outside diameter (steel and PVC of the same nominal size); copper tube and PEX share another set of outside diameters.

Outside diameter in inches and millimeters of steel, PVC, copper and PEX pipe from 1/2 to 2 inch nominal, as published, sorted by outside diameter
PipeOD, inOD, mm
1/2″ copper pipe0.62515.9
1/2″ PEX pipe0.62515.9
1/2″ PVC pipe0.84021.3
1/2″ steel pipe0.84021.3
3/4″ copper pipe0.87522.2
3/4″ PEX pipe0.87522.2
3/4″ PVC pipe1.05026.7
3/4″ steel pipe1.05026.7
1″ copper pipe1.12528.6
1″ PEX pipe1.12528.6
1″ PVC pipe1.31533.4
1″ steel pipe1.31533.4
1-1/4″ copper pipe1.37534.9
1-1/4″ PEX pipe1.37534.9
1-1/2″ copper pipe1.62541.3
1-1/2″ PEX pipe1.62541.3
1-1/4″ PVC pipe1.66042.2
1-1/4″ steel pipe1.66042.2
1-1/2″ PVC pipe1.90048.3
1-1/2″ steel pipe1.90048.3
2″ copper pipe2.12554.0
2″ PEX pipe2.12554.0
2″ PVC pipe2.37560.3
2″ steel pipe2.37560.3

How to measure a pipe

Calipers across the widest point give the outside diameter directly. Without calipers, wrap a tape measure, a string or a strip of paper once around the pipe, mark where it meets, and enter that distance as the distance around: the outside diameter is that distance divided by π (3.1416).

Measure bare pipe a few inches away from a fitting, and read any print on the pipe: it names the material and the schedule or type, which a measurement cannot tell apart when two pipes share an outside diameter.

Why two pipes can have the same outside diameter

Steel and PVC pipe use iron pipe sizes (IPS): each nominal size has one outside diameter and the wall grows with the schedule. Copper tube and PEX use copper tube sizes (CTS), a different set of outside diameters. A measurement therefore narrows the choice to a size system and a nominal size; the print on the pipe settles the material and wall.

Embed this calculator

Paste this code into your site or forum post to show the calculator. It works on any page that allows iframes. Preview the widget.