1-1/2 inch steel pipe dimensions

1-1/2 inch Schedule 40 steel pipe has an outside diameter of 1.900 in (48.3 mm) and a 1.610 in (40.9 mm) inside diameter. Schedule 80 has a 0.200 in wall and a 1.500 in inside diameter. Steel pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule.

1-1/2 inch steel pipe dimensions by schedule

1-1/2 inch steel pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
VariantOD, inOD, mmWall, inID, inID, mmGallons per footWeight, lb/ft
Schedule 401.90048.30.1451.61040.90.10582.720
Schedule 801.90048.30.2001.50038.10.09183.630
END VIEW, TO SCALEOD 1.900 inID 1.610 in40.9 mmwall 0.1451-1/2 in Schedule 40 steel pipe

How much water does 1-1/2 inch steel pipe hold?

One foot of 1-1/2 inch Schedule 40 steel pipe holds 0.1058 gallons (0.400 L) of water; 100 feet holds 10.58 gallons.

Water held by 1-1/2 inch steel pipe by length, from the inside diameter of each variant
LengthSchedule 40, galSchedule 80, gal
1 ft0.10580.0918
10 ft1.060.92
25 ft2.642.29
50 ft5.294.59
100 ft10.589.18

For a run of mixed sizes, use the pipe volume calculator.

Is 1-1/2 inch steel pipe the same size as other 1-1/2″ pipe?

1-1/2 inch steel pipe has the same 1.900 in outside diameter as 1-1/2″ PVC pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1-1/2″ pipe by material
PipeOD, inOD, mm
steel pipe (this page)1.90048.3
copper pipe1.62541.3
PEX pipe1.62541.3
PVC pipe1.90048.3

1-1/2 inch steel pipe compared with the sizes next to it

The next size up, 2 inch, is 0.475 in larger outside and holds 65% more water per foot at Schedule 40.

Steel pipe one size down, this size and one size up at Schedule 40: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
1-1/4″1.6601.3800.0777
1-1/2″ (this page)1.9001.6100.1058
2″2.3752.0670.1743

How to tell 1-1/2 inch steel pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the wall. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 1.900 in (48.3 mm) is 1-1/2 inch steel pipe or PVC pipe of the same nominal size; the print on the pipe gives the schedule. The pipe size identifier matches a measurement against every size and material.