Pipe size chart: steel pipe dimensions
Steel pipe (black and galvanized) from 1/8 to 12 inch runs from 0.405 to 12.750 in outside diameter (10.3 to 323.8 mm), with Schedule 40, Schedule 80 for each size. Steel pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule.
| Nominal size | OD, in | OD, mm | Schedule 40 wall, in | Schedule 40 ID, in | Schedule 80 wall, in | Schedule 80 ID, in | Schedule 40 gallons per foot |
|---|---|---|---|---|---|---|---|
| 1/8″ | 0.405 | 10.3 | 0.068 | 0.269 | 0.095 | 0.215 | 0.003 |
| 1/4″ | 0.540 | 13.7 | 0.088 | 0.364 | 0.119 | 0.302 | 0.0054 |
| 3/8″ | 0.675 | 17.1 | 0.091 | 0.493 | 0.126 | 0.423 | 0.0099 |
| 1/2″ | 0.840 | 21.3 | 0.109 | 0.622 | 0.147 | 0.546 | 0.0158 |
| 3/4″ | 1.050 | 26.7 | 0.113 | 0.824 | 0.154 | 0.742 | 0.0277 |
| 1″ | 1.315 | 33.4 | 0.133 | 1.049 | 0.179 | 0.957 | 0.0449 |
| 1-1/4″ | 1.660 | 42.2 | 0.140 | 1.380 | 0.191 | 1.278 | 0.0777 |
| 1-1/2″ | 1.900 | 48.3 | 0.145 | 1.610 | 0.200 | 1.500 | 0.1058 |
| 2″ | 2.375 | 60.3 | 0.154 | 2.067 | 0.218 | 1.939 | 0.1743 |
| 2-1/2″ | 2.875 | 73.0 | 0.203 | 2.469 | 0.276 | 2.323 | 0.2487 |
| 3″ | 3.500 | 88.9 | 0.216 | 3.068 | 0.300 | 2.900 | 0.384 |
| 3-1/2″ | 4.000 | 101.6 | 0.226 | 3.548 | 0.318 | 3.364 | 0.5136 |
| 4″ | 4.500 | 114.3 | 0.237 | 4.026 | 0.337 | 3.826 | 0.6613 |
| 5″ | 5.563 | 141.3 | 0.258 | 5.047 | 0.375 | 4.813 | 1.0393 |
| 6″ | 6.625 | 168.3 | 0.280 | 6.065 | 0.432 | 5.761 | 1.5008 |
| 8″ | 8.625 | 219.1 | 0.322 | 7.981 | 0.500 | 7.625 | 2.5988 |
| 10″ | 10.750 | 273.1 | 0.365 | 10.020 | 0.594 | 9.564 | 4.0963 |
| 12″ | 12.750 | 323.8 | 0.406 | 11.938 | 0.688 | 11.376 | 5.8146 |
- Outside diameter
- Schedule 40 inside diameter
- Schedule 80 inside diameter
Why a 1 inch steel pipe is not 1 inch across
The nominal size is a trade name, not a measurement. 1 inch steel pipe measures 1.315 in outside and 1.049 in inside at Schedule 40. Steel pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule. To match a fitting, compare outside diameters; to work out how much water a pipe holds, use the inside diameter.
How to measure steel pipe to find its size
Measure the outside diameter: calipers across the widest point, or a tape wrapped once around the pipe divided by 3.1416. Find the nearest outside diameter in the chart; the print on the pipe gives the schedule. The pipe size identifier matches a measurement against every material at once. For the water a run holds, use the pipe volume calculator.