4 inch steel pipe dimensions

4 inch Schedule 40 steel pipe has an outside diameter of 4.500 in (114.3 mm) and a 4.026 in (102.3 mm) inside diameter. Schedule 80 has a 0.337 in wall and a 3.826 in inside diameter. Steel pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule.

4 inch steel pipe dimensions by schedule

4 inch steel pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
VariantOD, inOD, mmWall, inID, inID, mmGallons per footWeight, lb/ft
Schedule 404.500114.30.2374.026102.30.661310.800
Schedule 804.500114.30.3373.82697.20.597215.000
END VIEW, TO SCALEOD 4.500 inID 4.026 in102.3 mmwall 0.2374 in Schedule 40 steel pipe

How much water does 4 inch steel pipe hold?

One foot of 4 inch Schedule 40 steel pipe holds 0.6613 gallons (2.503 L) of water; 100 feet holds 66.13 gallons.

Water held by 4 inch steel pipe by length, from the inside diameter of each variant
LengthSchedule 40, galSchedule 80, gal
1 ft0.66130.5972
10 ft6.615.97
25 ft16.5314.93
50 ft33.0729.86
100 ft66.1359.72

For a run of mixed sizes, use the pipe volume calculator.

Is 4 inch steel pipe the same size as other 4″ pipe?

4 inch steel pipe has the same 4.500 in outside diameter as 4″ PVC pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 4″ pipe by material
PipeOD, inOD, mm
steel pipe (this page)4.500114.3
copper pipe4.125104.8
PVC pipe4.500114.3

4 inch steel pipe compared with the sizes next to it

The next size up, 5 inch, is 1.063 in larger outside and holds 57% more water per foot at Schedule 40.

Steel pipe one size down, this size and one size up at Schedule 40: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
3-1/2″4.0003.5480.5136
4″ (this page)4.5004.0260.6613
5″5.5635.0471.0393

How to tell 4 inch steel pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the wall. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 4.500 in (114.3 mm) is 4 inch steel pipe or PVC pipe of the same nominal size; the print on the pipe gives the schedule. The pipe size identifier matches a measurement against every size and material.