1/2 inch steel pipe dimensions

1/2 inch Schedule 40 steel pipe has an outside diameter of 0.840 in (21.3 mm) and a 0.622 in (15.8 mm) inside diameter. Schedule 80 has a 0.147 in wall and a 0.546 in inside diameter. Steel pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule.

1/2 inch steel pipe dimensions by schedule

1/2 inch steel pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
VariantOD, inOD, mmWall, inID, inID, mmGallons per footWeight, lb/ft
Schedule 400.84021.30.1090.62215.80.01580.850
Schedule 800.84021.30.1470.54613.90.01221.090
END VIEW, TO SCALEOD 0.840 inID 0.622 in15.8 mmwall 0.1091/2 in Schedule 40 steel pipe

How much water does 1/2 inch steel pipe hold?

One foot of 1/2 inch Schedule 40 steel pipe holds 0.0158 gallons (0.060 L) of water; 100 feet holds 1.58 gallons.

Water held by 1/2 inch steel pipe by length, from the inside diameter of each variant
LengthSchedule 40, galSchedule 80, gal
1 ft0.01580.0122
10 ft0.160.12
25 ft0.390.3
50 ft0.790.61
100 ft1.581.22

For a run of mixed sizes, use the pipe volume calculator.

Is 1/2 inch steel pipe the same size as other 1/2″ pipe?

1/2 inch steel pipe has the same 0.840 in outside diameter as 1/2″ PVC pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1/2″ pipe by material
PipeOD, inOD, mm
steel pipe (this page)0.84021.3
copper pipe0.62515.9
PEX pipe0.62515.9
PVC pipe0.84021.3

1/2 inch steel pipe compared with the sizes next to it

The next size up, 3/4 inch, is 0.210 in larger outside and holds 75% more water per foot at Schedule 40.

Steel pipe one size down, this size and one size up at Schedule 40: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
3/8″0.6750.4930.0099
1/2″ (this page)0.8400.6220.0158
3/4″1.0500.8240.0277

How to tell 1/2 inch steel pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the wall. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 0.840 in (21.3 mm) is 1/2 inch steel pipe or PVC pipe of the same nominal size; the print on the pipe gives the schedule. The pipe size identifier matches a measurement against every size and material.