1/2 inch PEX pipe dimensions

1/2 inch SDR 9 PEX pipe has an outside diameter of 0.625 in (15.9 mm) and a 0.485 in (12.3 mm) inside diameter, calculated from its wall. PEX tubing is made in copper tube sizes (CTS), the size system of copper water tube.

1/2 inch PEX pipe dimensions by size

1/2 inch PEX pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below; an inside diameter marked “calculated” is the outside diameter minus twice the wall
VariantOD, inOD, mmMin. wall, inID, inID, mmGallons per foot
SDR 90.62515.90.0700.485 calculated12.30.0096
END VIEW, TO SCALEOD 0.625 inID 0.485 in12.3 mmwall 0.0701/2 in SDR 9 PEX pipe

How much water does 1/2 inch PEX pipe hold?

One foot of 1/2 inch SDR 9 PEX pipe holds 0.0096 gallons (0.036 L) of water; 100 feet holds 0.96 gallons.

Water held by 1/2 inch PEX pipe by length, from the inside diameter of each variant
LengthSDR 9, gal
1 ft0.0096
10 ft0.1
25 ft0.24
50 ft0.48
100 ft0.96

For a run of mixed sizes, use the pipe volume calculator.

Is 1/2 inch PEX pipe the same size as other 1/2″ pipe?

1/2 inch PEX pipe has the same 0.625 in outside diameter as 1/2″ copper pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1/2″ pipe by material
PipeOD, inOD, mm
PEX pipe (this page)0.62515.9
copper pipe0.62515.9
PVC pipe0.84021.3
steel pipe0.84021.3

1/2 inch PEX pipe compared with the sizes next to it

The next size up, 3/4 inch, is 0.250 in larger outside and holds 97% more water per foot at SDR 9.

PEX pipe one size down, this size and one size up at SDR 9: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
3/8″0.5000.3600.0053
1/2″ (this page)0.6250.4850.0096
3/4″0.8750.6810.0189

How to tell 1/2 inch PEX pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the wall. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 0.625 in (15.9 mm) is 1/2 inch PEX pipe or copper pipe of the same nominal size; the print on the pipe gives the dimension ratio (SDR). The pipe size identifier matches a measurement against every size and material.