1/2 inch PVC pipe dimensions

1/2 inch Schedule 40 PVC pipe has an outside diameter of 0.840 in (21.3 mm) and a 0.602 in (15.3 mm) average inside diameter. Schedule 80 has a 0.147 in wall and a 0.526 in inside diameter. PVC pipe uses iron pipe sizes (IPS): each nominal size has one outside diameter, and the wall grows with the schedule.

1/2 inch PVC pipe dimensions by schedule

1/2 inch PVC pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
VariantOD, inOD, mmMin. wall, inID, inID, mmGallons per footWeight, lb/ftMax pressure, psi
Schedule 400.84021.30.1090.602 average15.30.01480.170600
Schedule 800.84021.30.1470.526 average13.40.01130.231850

Maximum working pressure as the document gives it: water, non-shock, at 73°F.

END VIEW, TO SCALEOD 0.840 inID 0.602 in15.3 mmwall 0.1091/2 in Schedule 40 PVC pipe

How much water does 1/2 inch PVC pipe hold?

One foot of 1/2 inch Schedule 40 PVC pipe holds 0.0148 gallons (0.056 L) of water; 100 feet holds 1.48 gallons.

Water held by 1/2 inch PVC pipe by length, from the inside diameter of each variant
LengthSchedule 40, galSchedule 80, gal
1 ft0.01480.0113
10 ft0.150.11
25 ft0.370.28
50 ft0.740.56
100 ft1.481.13

For a run of mixed sizes, use the pipe volume calculator.

Is 1/2 inch PVC pipe the same size as other 1/2″ pipe?

1/2 inch PVC pipe has the same 0.840 in outside diameter as 1/2″ steel pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1/2″ pipe by material
PipeOD, inOD, mm
PVC pipe (this page)0.84021.3
copper pipe0.62515.9
PEX pipe0.62515.9
steel pipe0.84021.3

1/2 inch PVC pipe compared with the sizes next to it

The next size up, 3/4 inch, is 0.210 in larger outside and holds 78% more water per foot at Schedule 40.

PVC pipe one size down, this size and one size up at Schedule 40: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
3/8″0.6750.4730.0091
1/2″ (this page)0.8400.6020.0148
3/4″1.0500.8040.0264

How to tell 1/2 inch PVC pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the wall. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 0.840 in (21.3 mm) is 1/2 inch PVC pipe or steel pipe of the same nominal size; the print on the pipe gives the schedule. The pipe size identifier matches a measurement against every size and material.