1/2 inch copper pipe dimensions

1/2 inch Type L copper pipe has an outside diameter of 0.625 in (15.9 mm) and a 0.545 in (13.8 mm) inside diameter. Type K has a 0.049 in wall and a 0.527 in inside diameter; Type M has a 0.028 in wall and a 0.569 in inside diameter. Copper tube uses copper tube sizes (CTS): Types K, L and M of one nominal size share the outside diameter and differ in wall thickness.

1/2 inch copper pipe dimensions by type

1/2 inch copper pipe: outside diameter, wall and inside diameter in inches and millimeters as published in the documents below
TypeOD, inOD, mmWall, inID, inID, mmGallons per footWeight, lb/ft
Type K0.62515.90.0490.52713.40.01130.344
Type L0.62515.90.0400.54513.80.01210.285
Type M0.62515.90.0280.56914.50.01320.204
END VIEW, TO SCALEOD 0.625 inID 0.545 in13.8 mmwall 0.0401/2 in Type L copper pipe

How much water does 1/2 inch copper pipe hold?

One foot of 1/2 inch Type L copper pipe holds 0.0121 gallons (0.046 L) of water; 100 feet holds 1.21 gallons.

Water held by 1/2 inch copper pipe by length, from the inside diameter of each type
LengthType K, galType L, galType M, gal
1 ft0.01130.01210.0132
10 ft0.110.120.13
25 ft0.280.30.33
50 ft0.570.610.66
100 ft1.131.211.32

For a run of mixed sizes, use the pipe volume calculator.

Is 1/2 inch copper pipe the same size as other 1/2″ pipe?

1/2 inch copper pipe has the same 0.625 in outside diameter as 1/2″ PEX pipe. Pipe of another size system with the same nominal size has a different outside diameter, so its fittings do not fit without an adapter.

Outside diameter of 1/2″ pipe by material
PipeOD, inOD, mm
copper pipe (this page)0.62515.9
PEX pipe0.62515.9
PVC pipe0.84021.3
steel pipe0.84021.3

1/2 inch copper pipe compared with the sizes next to it

The next size up, 5/8 inch, is 0.125 in larger outside and holds 49% more water per foot at Type L.

Copper pipe one size down, this size and one size up at Type L: outside and inside diameter in inches and gallons per foot
Nominal sizeOD, inID, inGallons per foot
3/8″0.5000.4300.0075
1/2″ (this page)0.6250.5450.0121
5/8″0.7500.6660.0181

How to tell 1/2 inch copper pipe from other sizes

Measure the outside of the pipe, not the inside: the nominal size is a name, and the inside diameter changes with the type. Read the outside diameter with calipers, or wrap a tape or a strip of paper around the pipe and divide the length by 3.1416. A reading close to 0.625 in (15.9 mm) is 1/2 inch copper pipe or PEX pipe of the same nominal size; the print on the pipe gives the type. The pipe size identifier matches a measurement against every size and material.